Additive Engineering

SLA/DLP Photopolymer Cure Depth vs. Exposure Dose & Oxygen Inhibition Zone Sizing Calculator

SLA/DLP Photopolymer Cure Depth vs. Exposure Dose & Oxygen Inhibition Zone Sizing engineering calculator.

Quick Answer

Calculate SLA/DLP Photopolymer Cure Depth vs. Exposure Dose & Oxygen Inhibition Zone Sizing

Calculator

Cure Depth (m)
—

Result Interpretation

SLA/DLP Photopolymer Cure Depth vs. Exposure Dose & Oxygen Inhibition Zone Sizing Calculator computes Cure Depth in m using the defined engineering formula and the input values provided.

Worked Example

Verified calculation

Given:

  • Penetration Depth = 0.00012
  • Critical Exposure Dose = 8.5
  • Exposure Dose = 1200
  • Oxygen Inhibition Zone Thickness = 2.5E-6

Expected Result:

  • Cure Depth = 0.00058900128067358

Engineering Interpretation:

Under the given input conditions, the calculated result is: Cure Depth = 0.00058900128067358 m.

The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from automatically validated test cases.

Formula / Method

cure depth = (penetration depth * log(exposure dose / critical exposure dose)) - (2.0 * oxygen inhibition zone thickness)

Formula family: formula_additive_sladlp_photopolymer_cure_depth_vs_exposure_dose_oxygen_inhibition_zone_sizing_tool

Variables

SymbolLabelRoleDescription
exposure_dose Exposure Dose INPUT Exposure Dose
Ec Critical Exposure Dose INPUT Critical Exposure Dose
Dp Penetration Depth INPUT Penetration Depth
oxygen_inhibition_zone_thickness Oxygen Inhibition Zone Thickness INPUT Oxygen Inhibition Zone Thickness
cure_depth Cure Depth OUTPUT Cure Depth

Calculation Steps

  1. Enter the exposure dose in J/m^2.
  2. Enter the critical exposure dose in J/m^2.
  3. Enter the penetration depth in m.
  4. Enter the oxygen inhibition zone thickness in m.
  5. Step 1: Compute cure depth.
  6. Read the cure depth (m) from the results.

Engineering Summary

Calculate SLA/DLP Photopolymer Cure Depth vs. Exposure Dose & Oxygen Inhibition Zone Sizing

Frequently Asked Questions

What does this calculator calculate?

The SLA/DLP Photopolymer Cure Depth vs. Exposure Dose & Oxygen Inhibition Zone Sizing Calculator estimates Cure Depth based on the input parameters you provide

Why is exposure dose important in this calculation?

exposure dose is directly proportional to cure depth. When you enter exposure dose in J/m^2, the calculator uses it in the engineering formula to compute the output

How should I interpret the result cure depth?

The calculator outputs cure depth in m. The result is computed directly from the input values using the defined engineering formula

What units should I use for the inputs?

Enter each value in the units shown next to the input field: Exposure Dose (J/m^2), Critical Exposure Dose (J/m^2), Penetration Depth (m), Oxygen Inhibition Zone Thickness (m). Make sure all inputs use the specified units for consistent results

What assumptions does this calculator use?

This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment

Related Tools

Browse More Tools

Explore the full index of engineering calculators on this vertical site.